volume setting collider tag

Post your RealFlow | Cinema 4D questions here.
Post Reply
Philip van Wijngaarden
Posts: 9
Joined: Fri Mar 23, 2018 9:58 am

volume setting collider tag

Post by Philip van Wijngaarden » Fri Mar 23, 2018 10:13 am

Hi, I'm trying to make a fluid follow an organic shape more precise. In my project the particles are floating above the collision object. So, you adjust the collision geometry and set the collission distance to 0. But the volume tab seems to have disappeard. I tried following along with this tutoral https://youtu.be/NEj_iishwJo and see this:
screen 1.jpg
But when I try to follow along in my scene (RF 2.5 C4d 19) all I see is this
screen 2.jpg
Where do I set the precision of the collider geometry? Any suggestions are welcome.

Thanks
Philip
You do not have the required permissions to view the files attached to this post.
Manipulator of salt, vertrices and pixels

Philip van Wijngaarden
Posts: 9
Joined: Fri Mar 23, 2018 9:58 am

Re: volume setting collider tag

Post by Philip van Wijngaarden » Fri Mar 23, 2018 11:59 am

Aha, I just need to add an extra Volume tag to the collider object. Problem solved
Manipulator of salt, vertrices and pixels

Post Reply