Luis M.'s Hybrido to Realwave problem

[Billabong]

In Luis's 3rd part of the tutorial where we are using the projecting graph, I am having an issue projecting my Hybrido particles onto my realwave. I know it has something to do with the "Real_01" node, but I cannot figure it out. I made sure the Hybrido02 is not connected to anything. I've also made sure all my names were correct. I've put in almost every number from 0 to 110 and nothing works.

Any thoughts or ideas?

Thanks for taking the time.

-Brandon

[LuisMiguel]

Hi,

Maybe the distance between RealWave and mesh is not correct in the graph params. So, for that reason the RealWave can't be placed on the mesh.

luisM.

[Billabong]

Thank you so much for replying Luis, Can you tell me what node i need to check for that and how I would decide what to make the distance.

Thank you so much again

-Brandon

[Billabong]

I have been banging my head trying to get this projection figured out with no luck. I took a cube and measured the the distance between the realwave and the Hybrido particles. Its around 98 units(as you can see in one of the images) so I changed the search distance in the "FindNearestPostion" node to 180 and took the real node so far all the way to 100 and its only project maybe an 1/8th of the particles. What am I doing wrong? The only other thing I can think of is maybe my scale for everything is to large.

As you can see, only a small portion of the particles projected.


Here you can see my measurement with the cube



My Real_01 setting




and my FindNearestPosition settings



I really need some quick help,please

Thank you for taking the time.

-Brandon

[Billabong]

My problem was the scene scale.