RealFlow Official Forum

In Luis's 3rd part of the tutorial where we are using the projecting graph, I am having an issue projecting my Hybrido particles onto my realwave. I know it has something to do with the "Real_01" node, but I cannot figure it out. I made sure the Hybrido02 is not connected to anything. I've also made sure all my names were correct. I've put in almost every number from 0 to 110 and nothing works.

Any thoughts or ideas?

Thanks for taking the time.

-Brandon

Hi,

Maybe the distance between RealWave and mesh is not correct in the graph params. So, for that reason the RealWave can't be placed on the mesh.

luisM.

Thank you so much for replying Luis, Can you tell me what node i need to check for that and how I would decide what to make the distance.

Thank you so much again

-Brandon

I have been banging my head trying to get this projection figured out with no luck. I took a cube and measured the the distance between the realwave and the Hybrido particles. Its around 98 units(as you can see in one of the images) so I changed the search distance in the "FindNearestPostion" node to 180 and took the real node so far all the way to 100 and its only project maybe an 1/8th of the particles. What am I doing wrong? The only other thing I can think of is maybe my scale for everything is to large.

As you can see, only a small portion of the particles projected.


Here you can see my measurement with the cube



My Real_01 setting




and my FindNearestPosition settings



I really need some quick help,please

Thank you for taking the time.

-Brandon

My problem was the scene scale.