hybrido underwater explotion

Post here anything related to RealFlow that doesn't specifically belong in any of the forums below
Post Reply
marc segers
Posts: 1
Joined: Wed Aug 20, 2014 4:54 pm

hybrido underwater explotion

Post by marc segers » Tue May 19, 2020 9:46 pm

How can i make a underwater explotion?

Best regards, M.

Christian Zuppinger
Posts: 24
Joined: Wed Jul 11, 2018 9:32 am

Re: hybrido underwater explotion

Post by Christian Zuppinger » Wed May 20, 2020 5:32 pm

Hi

1. Create a filled box, for example by adding a Hybrido closed domain
2. Place an attractor daemon underwater, with attenuation active
3. Define with keyframes a sharp decrease of the force into the minus, such as from 0 to -500 and back.
4. Make sure that the attractor is connected to the Hybrido domain. A crown splash daemon could also be a useful addition. You just have to get the timing right.
5. Run simulation, adapt parameters, etc.

Post Reply