hybrido underwater explotion
Posted: Tue May 19, 2020 9:46 pm
How can i make a underwater explotion?
Best regards, M.
Best regards, M.
Hi
1. Create a filled box, for example by adding a Hybrido closed domain
2. Place an attractor daemon underwater, with attenuation active
3. Define with keyframes a sharp decrease of the force into the minus, such as from 0 to -500 and back.
4. Make sure that the attractor is connected to the Hybrido domain. A crown splash daemon could also be a useful addition. You just have to get the timing right.
5. Run simulation, adapt parameters, etc.