Unable to see different weights in Maya

Post Reply
EarthHobbit
Posts: 4
Joined: Sat Oct 05, 2013 8:45 am

Unable to see different weights in Maya

Post by EarthHobbit » Wed Dec 11, 2013 4:56 pm

Hi, I have 2 emitters and one particle mesh for these 2 emitters.
I run the simulation in RF.

In Maya I import the mesh bin files, click on "Fluid Weights as Blind Data", and start the blindDataEditor.
However only 1 weight is displayed there, not the 2 I am expecting as I have 2 emitters.
What did I forget to do ?

Thanks !

User avatar
LuisMiguel
Posts: 528
Joined: Fri Jun 04, 2010 2:37 pm

Re: Unable to see different weights in Maya

Post by LuisMiguel » Thu Dec 12, 2013 9:53 am

Hey,

Do you have a bin file and the flw scene to check here?

luisM.

EarthHobbit
Posts: 4
Joined: Sat Oct 05, 2013 8:45 am

Re: Unable to see different weights in Maya

Post by EarthHobbit » Thu Dec 12, 2013 11:24 am

Dear Luis,
Please find both files at the following links:
http://www.petits-suisses.ch/Mix.flw
http://www.petits-suisses.ch/ParticleMesh01_00042.bin

Thanks A LOT for your help :-)

Laurent

User avatar
LuisMiguel
Posts: 528
Joined: Fri Jun 04, 2010 2:37 pm

Re: Unable to see different weights in Maya

Post by LuisMiguel » Mon Dec 16, 2013 10:20 am

Hi Laurent,

This is cause you have used particle mesh. Unfortunately, the particles mesh doesn't have the distribution for vertex weight. If you try with particle mesh legacy, you'll have the weight for vertexes.

luisM.

EarthHobbit
Posts: 4
Joined: Sat Oct 05, 2013 8:45 am

Re: Unable to see different weights in Maya

Post by EarthHobbit » Mon Dec 16, 2013 2:05 pm

It works far better with the legacy one, thanks !!

User avatar
LuisMiguel
Posts: 528
Joined: Fri Jun 04, 2010 2:37 pm

Re: Unable to see different weights in Maya

Post by LuisMiguel » Wed Dec 18, 2013 11:15 am

you're welcome ;)

The weights for particle mesh will be included soon.

luisM.

EarthHobbit
Posts: 4
Joined: Sat Oct 05, 2013 8:45 am

Re: Unable to see different weights in Maya

Post by EarthHobbit » Thu Dec 19, 2013 10:19 pm

LuisMiguel wrote:you're welcome ;)

The weights for particle mesh will be included soon.

luisM.
Like :-)

Post Reply